How to make scalable 3D printing with powder deposition process

Engineers at 3D printing company Aerosint has recently published an article outlining the company’s ideas about the future of multi-material 3D printing. As we reported back in January, the Belgian SLS expert has experimented with developing multi-material 3D printers, and the further development of this technology could have a transformational effect on the manufacturing world.

Multi-material 3D printing is important for the future of additive manufacturing technology and the companies that develop it, as the majority of products tend to be made from more than one material. Until it becomes easier to 3D print different materials simultaneously with the same system, the large-scale production applications of the technology will remain limited to things like reverse-engineered replacements for obsolete components.

Multi-material 3D printing is currently difficult to achieve in terms of scalability as well as affordability. One of the most common ways to 3D print multiple materials is as composite materials. Composites are effectively two different materials, joined together in one way or another. This gives them a combination of the properties of both materials, like high thermal resistance and mechanical strength, for example. Metal alloys or fiber-reinforced polymers are good examples of this composite material.

Arguably the best type of composite, referred to by the Aerosint article as the “holy grail” of the composites world, is the Functionally Graded Material (FGM). Instead of the usual case of a reinforcing material being distributed throughout a base material, FGMs are composed of two or more materials with a graduated interface in between each, smoothly transitioning from one to the other. This provides a better distribution of mechanical, thermal and chemical stresses when compared to the concentration of these at a distinct boundary between two materials, which would cause weaknesses.

FGMs are most useful in extreme environments with extraordinarily high thermal, mechanical, and/or chemical stresses where a single-material part would inevitably fail. In an FGM the mechanical, thermal, or chemical advantages of each material effectively cancel out the disadvantages of the other.

Most 3D printing techniques are capable of creating FGMs, in one way or another. FDM 3D printing technology can fuse together different polymers in a multi-extrusion system. Demonstrating the possibilities of this approach, Michelin recently combined different polymers to produce an advanced concept tire, which had extraordinarily varied elasticities throughout its structure. This method is still limited, however, in terms of scale and speed. The demands of large-scale manufacturing mean that FDM is still restricted to producing prototypes.

A more advanced 3D printing technique, Direct Metal Deposition (DMD), can produce metal-metal and metal-ceramic FGM composites with a near-continuous gradient. The disadvantages of this method are that it is prohibitively expensive and time-consuming. The technology itself costs a lot to buy and maintain, and each part must be made one at a time. Material waste is another serious issue preventing DMD being implemented more, with wastage rates of around 70 percent.

In the future, probably the most likely candidate for effective, scalable, affordable production of FGM parts would be SLS or SLM 3D printing technology. These powder bed techniques are fast, relatively affordable, and capable of producing batches of varying sizes. However, a way for them to fabricate FGM composites consistently on a large scale hasn’t yet been proven. The key to creating FGM composites using powder bed fusion techniques would be a multi-powder deposition system in combination with bi-material co-sintering, offering voxel-level control over the printing process. Aerosint is in the process of developing something along these lines, and has so far achieved two-powder deposition. Theoretically, the number of materials is limitless, and the powders could be polymer, metal, or ceramic, as long as the flowability and particle size distribution are compatible with the SLS process.

If the integration of multi-material composites in 3D printing were to be achieved, it could mean a huge expansion of the possibilities for additive manufacturing. Every manufacturing sector would benefit from a new generation of affordable parts with elaborate geometries and advanced material properties, being produced quickly, on-demand.


My partner and I approached David at Re3dtech with our project and were greeted with kind and caring service. Throughout the last couple of months we have placed several orders in varying size and were even able to sit down with David and the owner to discuss our needs as a small business. Through this sit down we saw their passion for assisting both small and large clients in achieving their goals. We even had a hiccup with a batch of prints that was immediately addressed and remedied with precision and care. I almost don't want to recommend these guys because I feel like I have stumbled upon a hidden gem in 3D printing services and selfishly want to keep it to myself. Jokes aside we will be continuing our business relationship with the folks there and look forward to growing our order quantities and business with their help.
Re3DTech was instrumental in helping us get our product, Stroba™, to market faster! We needed a technology that could do snap fits and looks and feels as close the injection molded part as possible, and Re3D Tech was there for us. We used SOLIDWORKS Make to get in touch originally, upload models directly, and sign an NDA directly with their excellent team. It was really simple and easy to use their quoting tool as well. Excellent prices, excellent lead times, and superior quality are perfect words to describe our experience with Re3DTech. We went through many prototypes for Stroba™, and we at Goodfriend Innovations™ use Re3DTech for our other rapid prototyping jobs to help get our additional productions out to market faster than the competition. 5 Stars
I provided RE3DTECH three laser scanned ".stl" files for 3-D printing of prototypes. I used their on-line quote and file delivery process. The file acceptance and resultant quote were returned quickly. The parts were received at the quoted time. The parts are quite complex with many holes, angles, curvatures and notches. Each of the parts came out identical to the scanned parts dimensionally and passed the form/fit/function test in the upper level assembly. RE3DTECH has a high quality business process and produces high quality products. I will use them for future prototyping projects and recommend RE3DTECH.
Re3dtech is one of the most honest and reputable companies we have done business with. We decided to look into options for getting parts made in the USA for the retail market. It was awesome to find a local company with humble staff looking to provide their services meeting our criteria, not to mention meeting the Re3tech crew face to face and checking out their operation. Peter was very honest, knowledgable about design. Peter's creative element made working with him a great pleasure. Jim's flexibility was a breath of fresh air and greatly appreciated. CentralSound is proud to scratch the surface with Made in the USA parts in the retail market now, thanks to Re3dtech. Hope to do more business with them in the future.
Re3dtech has consistently delivered the best service I have ever received in the industry. Their response time is unmatched and they always stand by their parts and quality. They regularly make me look like an all star at my job.
It is always a pleasure to have a vendor that provides quality, experience, and always shows as much care for your order, and your product as you do!